3/4″ (19mm) Momentary Push Button Power Starter Switch / Boat Horn Metal w/ LED

Description

3/4″ (19mm) Momentary Push Button Power Starter Switch / Boat Horn Metal w/ LED

• Momentary pushbutton switches may be used in a variety of applications including cars, motorcycles, boats, computers, LEDs, and electronics projects. Use them as a starter switch, boat horn, computer power switch, and other applications in which temporary activation of a circuit is desired
• It has a protection rating of IP67 waterproof, meaning it can withstand exposure to heavy rain, splashes, etc., without damage
• The switch and LED are separate. The LED can be on all the time or only when the button is pressed, depending on how you wire it
• Installation: Cut mounting hole in the panel using a 3/4″ drill bit. Screw the threaded body of the switch into the panel cutout hole and secure it on the reverse side with the included metal nut. The rubber O-ring may be used for additional water resistance by placing it between the back of the faceplate and the top surface of the panel
• Package includes switch, metal nut and rubber O-ring

Specifications
Panel Cutout Diameter: 3/4″ (19mm)
Thread Depth: 17mm
Faceplate Diameter: 22mm
Depth (Including Contacts): 40mm
Operation Type: Momentary (Push the button, ON; release it, OFF)
Contact Form: SPST (Single Pole, Single Throw)
Contact Configuration: 1NO
Max Switch Rating: 250V AC/DC 5A
LED rating: 12V DC 15mA
Protection Level: IP67
Operation Temperature: -20C to 55C